---

Section 1: Product Identification
   Chemical Name:       Tetraammineplatinum (II) chloride monohydrate, 99% (99.95%-Pt)    
   CAS Registry Number:       13933-32-9    
   Formula:       [Pt(NH3)4]Cl2.H2O    
   EINECS Number:       237-706-5    
   Chemical Family:       metal-ammine complexes    
   Synonym:       Platinum(2+), tetraammine-, dichloride, (SP-4-1)-,    

---

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       13933-32-9       100%       0.002mg/m3(as-Pt)       0.002mg/m3(as-Pt)    

---

Section 3: Hazards Identification
   Exposure to platinum compounds has been shown to cause wheezing, coughing, and running of the nose.
   Emergency Overview:
   Skin contact can lead to dermatitis.
   Primary Routes of Exposure:       Ingestion, inhalation, skin    
   Eye Contact:       Causes mild to moderate irritation of the eyes.    
   Skin Contact:       Causes slight to mild irritation of the skin.    
   Inhalation:       Inhalation of the dust may cause wheezing, coughing, shortness of breath.    
   Ingestion:       Ingestion may lead to dizziness, abdominal cramps, vomiting, bloody diarrhea, weakness, and convulsions.    
   Irritating to skin, eyes and respiratory tract. Exposure to platinum compounds may lead to wheezing, coughing,
   Acute Health Affects:
   and running of the nose. Skin exposure may lead to dermatitis.
   Chronic Health Affects:       No information available on long-term chronic effects.    
   NTP:       No    
   IARC:       No    
   OSHA:       No    

---

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   Inhalation:
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   Ingestion:
   vomiting only if directed by medical personnel.

---

SECTION 5: Fire Fighting Measures
   Flash Point:       not applicable    
   Autoignition Temperature:       none    
   Explosion Limits:       none    
   Extinguishing Medium:       carbon dioxide, foam or dry powder    
   If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
   Special Fire Fighting Procedures:
   self- contained breathing apparatus and full protective clothing.
   Hazardous Combustion and       If involved in a fire this material may emit toxic and corrosive fumes.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

---

SECTION 6: Accidental Release Measures
   Small spills can be mixed with vermiculite, sodium carbonate or other suitable non combustible adsorbent and
   Spill and Leak Procedures:
   swept up.

---

SECTION 7: Handling and Storage
   Handling and Storage:       Store in a cool, dry place in a tightly sealed container.    

---

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves.    
   Ventilation:       To minimize exposure, handle the material in an efficient fume hood.    
   If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
   Respirator:
   Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       To minimize exposure, handle the material in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

---

SECTION 9: Physical and Chemical Properties
   Color and Form:       white xtl.    
   Molecular Weight:       334.09 (352.12)    
   Melting Point:       no data    
   Boiling Point:       no data    
   Vapor Pressure:       no data    
   Specific Gravity:       no data    
   Odor:       none    
   Solubility in Water:       Very soluble    

---

SECTION 10: Stability and Reactivity
   Stability:       air and moisture stable    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       none    
   Incompatibility:       active metals    
   Decomposition Products:       ammonium chloride, nitrogen oxides, and platinum salts.    

---

SECTION 11: Toxicological Information
   RTECS Data:       Mutation in microorganisms(bacteria); Salmonella typhimurium: 500ug/plate    
   Carcinogenic Effects:       No data    
   Mutagenic Effects:       Insufficient data    
   Tetratogenic Effects:       No data    

---

SECTION 12: Ecological Information
   Ecological Information:       No information available    

---

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

---

SECTION 14: Transportation
   Shipping Name (CFR):       Non-hazardous    
   Hazard Class (CFR):       NA    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       NA    
   UN ID Number (CFR):       NA    
   Shipping Name (IATA):       Non-hazardous    
   Hazard Class (IATA):       NA    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       NA    
   UN ID Number (IATA):       NA    

---

SECTION 15: Regulatory Information
   TSCA:       Listed in the TSCA inventory.    
   SARA (Title 313):       Not regulated by Title 313.    
   Second Ingredient:       None    

---

SECTION 16 - ADDITIONAL INFORMATION
N/A