Section 1. Chemical Product and Company Identification
Poly(styrene-co-maleic anhydride) Catalog
Common Name/
Number(s).
Trade Name
CAS# 26762-29-8
Manufacturer
Commercial Name(s)
Poly(styrene-co-maleic anhydride)
Section 3. Hazards Identification
Potential Acute Health Effects Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
Potential Chronic Health CARCINOGENIC EFFECTS: Not available.
Effects MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
Repeated or prolonged exposure is not known to aggravate medical condition.
Section 4. First Aid Measures
Eye Contact Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at
least 15 minutes. Get medical attention if irritation occurs.
Skin Contact Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.
Serious Skin Contact Not available.
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get
medical attention.
Serious Inhalation Not available.
Ingestion Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight
clothing such as a collar, tie, belt or waistband.
Serious Ingestion Not available.
Section 5. Fire and Explosion Data
Flammability of the Product May be combustible at high temperature.
Auto-Ignition Temperature Not available.
Flash Points Not available.
Flammable Limits Not available.
Not available.
Products of Combustion
Fire Hazards in Presence of Slightly flammable to flammable in presence of heat.
Various Substances
Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
of Various Substances Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Media SMALL FIRE: Use DRY chemical powder.
and Instructions LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Special Remarks on As with most organic solids, fire is possible at elevated temperatures
Fire Hazards
Special Remarks on Explosion Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust
Hazards explosion hazard.
Poly(styrene-co-maleic anhydride)
Section 6. Accidental Release Measures
Small Spill Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by
spreading water on the contaminated surface and dispose of according to local and regional authority
requirements.
Large Spill Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water
on the contaminated surface and allow to evacuate through the sanitary system.
Section 7. Handling and Storage
Precautions Keep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not
breathe dust. Keep away from incompatibles such as oxidizing agents, alkalis.
Storage Keep container tightly closed. Keep container in a cool, well-ventilated area.
Section 8. Exposure Controls/Personal Protection
Engineering Controls Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
Personal Protection Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
a Large Spill to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist
BEFORE handling this product.
Exposure Limits Not available.
Section 9. Physical and Chemical Properties
Physical state and appearance Solid. (Powdered solid.) Odor Not available.
Taste Not available.
Molecular Weight Not available.
White.
Color
Not available.
pH (1% soln/water)
Boiling Point Not available.
150°C (302°F)
Melting Point
Critical Temperature Not available.
Specific Gravity Not available.
Vapor Pressure Not applicable.
Vapor Density Not available.
Volatility Not available.
Odor Threshold Not available.
Water/Oil Dist. Coeff. Not available.
Ionicity (in Water) Not available.
Dispersion Properties Not available.
Solubility Not available.
Poly(styrene-co-maleic anhydride)
Section 10. Stability and Reactivity Data
The product is stable.
Stability
Instability Temperature Not available.
Excess heat, dust generation, incompatible materials
Conditions of Instability
Reactive with oxidizing agents, alkalis.
Incompatibility with various
substances
Corrosivity Not available.
Special Remarks on Not available.
Reactivity
Special Remarks on Not available.
Corrosivity
Polymerization Will not occur.
Section 11. Toxicological Information
Routes of Entry Inhalation. Ingestion.
Toxicity to Animals LD50: Not available.
LC50: Not available.
Chronic Effects on Humans Not available.
Other Toxic Effects on Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation.
Humans
Special Remarks on Not available.
Toxicity to Animals
Special Remarks on Not available.
Chronic Effects on Humans
Special Remarks on other Acute Potential Health Effects:
Toxic Effects on Humans Skin: May cause skin irritation.
Eyes: Dust may cause eye irritation.
Inhalation: Dust may cause respiratory tract irritation.
Ingestion: Expected to be a low hazard.
Section 12. Ecological Information
Ecotoxicity Not available.
BOD5 and COD Not available.
Products of Biodegradation Possibly hazardous short term degradation products are not likely. However, long term degradation products may
arise.
Not available.
Toxicity of the Products
of Biodegradation
Special Remarks on the Not available.
Products of Biodegradation
Poly(styrene-co-maleic anhydride)
Section 13. Disposal Considerations
Waste Disposal Waste must be disposed of in accordance with federal, state and local environmental
control regulations.
Section 14. Transport Information
DOT Classification Not a DOT controlled material (United States).
Not applicable.
Identification
Not applicable.
Special Provisions for
Transport
DOT (Pictograms)
Section 15. Other Regulatory Information and Pictograms
TSCA 8(b) inventory: Poly(styrene-co-maleic anhydride)
Federal and State
Regulations
California California prop. 65: This product contains the following ingredients for which the State of California has found
to cause cancer which would require a warning under the statute: No products were found.
Proposition 65
Warnings
California prop. 65: This product contains the following ingredients for which the State of California has found
to cause birth defects which would require a warning under the statute: No products were found.
Other Regulations EINECS: This product is not on the European Inventory of Existing Commercial Chemical Substances.
Canada: Listed on Canadian Domestic Substance.
China: Not listed on National Inventory.
Japan: Not listed on National Inventory (ENCS).
Korea: Not listed on National Inventory (KECI).
Philippines: Listed on National Inventory (PICCS).
Australia: Listed on AICS.
WHMIS (Canada) Not controlled under WHMIS (Canada).
Other Classifications
DSCL (EEC) This product is not classified according Not applicable.
to the EU regulations.
Health Hazard
HMIS (U.S.A.) 1 National Fire Protection
1 Flammability
1 Association (U.S.A.)
Fire Hazard
1 0 Reactivity
Health
Reactivity
0
Specific hazard
Personal Protection
E
WHMIS (Canada)
(Pictograms)
DSCL (Europe)
(Pictograms)
Poly(styrene-co-maleic anhydride)
TDG (Canada)
(Pictograms)
ADR (Europe)
(Pictograms)
Protective Equipment
Gloves.
Lab coat.
Dust respirator. Be sure to use an
approved/certified respirator or
equivalent.
SECTION 16 - ADDITIONAL INFORMATION
N/A
