(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol,851308-48-0，生产厂家，价格-洛克化工网移动版

(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol

中文名称：: (S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol

中文别名：: ()-(-)-[( S)- 2 -二(3,5 - 二甲苯基)磷酸二茂铁] [2 - 二(4 - 三氟甲基苯基)膦苯基]甲醇

英文名称：: Ferrocene,1-[bis(3,5-dimethylphenyl)phosphino]-2-[(S)-[2-[bis[4-(trifluoromethyl)phenyl]phosphino]phenyl]hydroxymethyl]-,(1R)- (9CI)

英文别名：: (R)-[2-bis(3,5-dimethylphenyl)phosphanylcyclopentyl]-[2-bis[4-(trifluoromethyl)phenyl]phosphanylphenyl]methanol,cyclopentane,iron;
(S)-(-)-[(S)-2-DI(3,5-XYLYL)PHOSPHINOFERROCENYL][2-DI(4-TRIFLUOROMETHYLPHENYL)PHOSPHINOPHENYL]METHAN;
(S)-(-)-[(S)-2-DI(3,5-XYLYL)PHOSPHINOFERROCENYL][2-DI(4-TRIFLUOROMETHYLPHENYL)PHOSPHINOPHENYL]METHANOL;
(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol,min.97%;
(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol, min. 97%;
(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol

CAS No.：: 851308-48-0

分子式：: C₄₇H₄₀F₆FeOP₂

分子量：: 852.60

精确分子量：: 852.18100

PSA：: 47.41000

分子结构式：

SDS：: 查看

(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol 物化性质

存储条件/存储方法：: 密封于阴凉干燥环境中
稳定性相关：: 遵照规定使用和储存则不会分解。
其它信息：: 1.       性状：无可用

2.       密度（g/mL,25/4℃）：无可用

3.       相对蒸汽密度（g/mL,空气=1）：无可用

4.       熔点（ºC）：无可用

5.       沸点（ºC,常压）：无可用

6.       沸点（ºC,5.2kPa）：无可用

7.       折射率：无可用

8.       闪点（ºC）：无可用

9.       比旋光度（º）：无可用

10.    自燃点或引燃温度（ºC）：无可用

11.    蒸气压（kPa,25ºC）：无可用

12.    饱和蒸气压（kPa,60ºC）：无可用

13.    燃烧热（KJ/mol）：无可用

14.    临界温度（ºC）：无可用

15.    临界压力（KPa）：无可用

16.    油水（辛醇/水）分配系数的对数值：无可用

17.    爆炸上限（%,V/V）：无可用

18.    爆炸下限（%,V/V）：无可用

19.    溶解性：无可用

(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol 毒理性

生态数据：

该物质对环境可能有危害，对水体应给予特别注意。

(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol MSDS

Section 1: Product Identification
   (S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol, min.
   Chemical Name:
   97%
   CAS Registry Number:       851308-48-0
   Formula:       C47H40F6FeOP2
   EINECS Number:       none
   Chemical Family:       metallocene ligand
   (S)-(-)-[2-di(4-trifluoromethylphenyl)phosphinophenyl][(S)-2-Di(3,5-xylyl)phosphinoferrocenyl]methanol, min.
   Synonym:
   97%

Section 2: Composition and Information on Ingredients
Ingredient CAS Number Percent ACGIH (TWA) OSHA (PEL)
Title compound 851308-48-0 100% 2.5mg/m3 (as F) 2.5mg/m3 (as F)

Section 3: Hazards Identification
   Emergency Overview:       Irritating to skin, eyes and respiratory tract.
   Primary Routes of Exposure:       Ingestion, inhalation, skin, eyes
   Eye Contact:       Causes irritation to the eyes.
   Skin Contact:       Causes irritation to the skin.
   Inhalation:       Dust is irritating to the nose, mucous membranes and respiratory tract.
   Ingestion:       No information available on the physiological effects of ingestion. May be harmful if swallowed.
   Acute Health Affects:       Irritating to skin, eyes and respiratory tract.
   Product contains fluorine which under certain conditions of use, decomposition, or metabolism, may generate
   Chronic Health Affects:       fluoride ion, causing, nausea, vomiting, labored breathing, hypocalcaemia, deterioration of bone and tooth
   structure, kidney and liver damage.
   NTP:       No
   IARC:       No
   OSHA:       No

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   Inhalation:
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   Ingestion:
   vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
   Flash Point:       none
   Autoignition Temperature:       no data
   Explosion Limits:       no data
   Extinguishing Medium:       carbon dioxide, dry powder or foam
   If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure
   Special Fire Fighting Procedures:
   self-contained breathing apparatus and full protective clothing.
   Hazardous Combustion and       If involved in a fire this material may emit irritating organic fumes.
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

SECTION 6: Accidental Release Measures
   Small spills can be mixed with vermiculite, sodium carbonate or other suitable non-combustible adsorbent and
   Spill and Leak Procedures:
   swept up.

SECTION 7: Handling and Storage
Handling and Storage: Store the material in a tightly sealed container in a cool, dry place.

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.
   Skin Protection:       Wear protective clothing and gloves.
   Ventilation:       Handle the material in an efficient fume hood.
   If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
   Respirator:
   Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       Handle the material in an efficient fume hood.
   Additional Protection:       No additional protection required.

SECTION 9: Physical and Chemical Properties
   Color and Form:       yellow powder
   Molecular Weight:       852.60
   Melting Point:       no data
   Boiling Point:       no data
   Vapor Pressure:       no data
   Specific Gravity:       no data
   Odor:       not determined
   Solubility in Water:       insoluble

SECTION 10: Stability and Reactivity
   Stability:       air and moisture stable
   Hazardous Polymerization:       no hazardous polymerization
   Conditions to Avoid:       none
   Incompatibility:       oxidizing agents, halogens
   Decomposition Products:       carbon dioxide, carbon monoxide, fluorinated organic fumes, phosphorus oxides.

SECTION 11: Toxicological Information
   RTECS Data:       No information available in the RTECS files.
   Carcinogenic Effects:       No data
   Mutagenic Effects:       No data
   Tetratogenic Effects:       No data

SECTION 12: Ecological Information
Ecological Information: No information available

SECTION 13: Disposal Considerations
Disposal: Dispose of according to local, state and federal regulations.

SECTION 14: Transportation
   Shipping Name (CFR):       Non-hazardous
   Hazard Class (CFR):       NA
   Additional Hazard Class (CFR):       NA
   Packaging Group (CFR):       NA
   UN ID Number (CFR):       NA
   Shipping Name (IATA):       Non-hazardous
   Hazard Class (IATA):       NA
   Additional Hazard Class (IATA):       NA
   Packaging Group (IATA):       NA
   UN ID Number (IATA):       NA

SECTION 15: Regulatory Information
   TSCA:       Not listed in the TSCA inventory
   SARA (Title 313):       Title compound not listed
   Second Ingredient:       none

SECTION 16 - ADDITIONAL INFORMATION
N/A

(S)-(-)-[(S)-2-Di(3,5-xylyl)phosphinoferrocenyl][2-di(4-trifluoromethylphenyl)phosphinophenyl]methanol 分子结构与计算化学数据

分子结构数据

1、摩尔折射率：无可用

2、摩尔体积（cm³/mol）：无可用

3、等张比容（90.2K）：无可用

4、表面张力（dyne/cm）：无可用

5、极化率：无可用