Trimethylsilylethynyl(phenyl)iodonium Revision number: 5
Tetrafluoroborate
SAFETY DATA SHEET
Section 1. IDENTIFICATION
Product name: Trimethylsilylethynyl(phenyl)iodonium Tetrafluoroborate
Revision number: 5
Section 2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Category 1
Flammable solids
HEALTH HAZARDS
Category 4
Acute toxicity (Oral)
Skin corrosion/irritation Category 1B
Serious eye damage/eye irritation Category 1
ENVIRONMENTAL HAZARDS Not classified
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Danger
Signal word
Hazard statements Flammable solid
Harmful if swallowed
Causes severe skin burns and eye damage
Precautionary statements:
[Prevention] Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Use explosion-proof electrical/ventilating/lighting equipment.
Do not breathe dust/fume/gas/mist/vapours/spray.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
[Response] IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
Wash contaminated clothing before reuse.
Immediately call a POISON CENTER or doctor/physician.
[Storage] Store locked up.
Trimethylsilylethynyl(phenyl)iodonium
Tetrafluoroborate
Section 2. HAZARDS IDENTIFICATION
[Disposal] Dispose of contents/container through a waste management company authorized by
the local government.
Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture: Substance
Components: Trimethylsilylethynyl(phenyl)iodonium Tetrafluoroborate
>98.0%(T)
Percent:
CAS Number: 127783-36-2
Phenyl(trimethylsilylethynyl)iodonium Tetrafluoroborate
Synonyms:
Chemical Formula: C11H14BF4ISi
Section 4. FIRST AID MEASURES
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER or doctor/physician.
Skin contact: Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. Immediately call a POISON CENTER or doctor/physician.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.Immediately call a POISON CENTER or
doctor/physician.
Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT
Ingestion:
induce vomiting.
Protection of first-aiders: A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.
Section 5. FIRE-FIGHTING MEASURES
Suitable extinguishing Dry chemical, foam, water spray, carbon dioxide.
media:
Specific hazards arising Explosion risk in case of fire. Fight fire remotely due to the risk of explosion.
Take care as it may decompose upon combustion or in high temperatures to
from the chemical:
generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
spraying with water. Eliminate all ignition sources if safe to do so.
Special protective When extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:
Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
emergency procedures: be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
up: appropriate laws and regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
hazards: case of a fire. Use spark-proof tools and explosion-proof equipment.
Section 7. HANDLING AND STORAGE
Precautions for safe handling
Trimethylsilylethynyl(phenyl)iodonium
Tetrafluoroborate
Section 7. HANDLING AND STORAGE
Technical measures: Handling is performed in a well ventilated place. Wear suitable protective equipment.
Be careful not to cause leakage, overflow, or dispersion. Steam should not be
generated unnecessarily. Keep away from heat/sparks/open flame/hot surfaces. -No
smoking. Take measures to prevent the build up of electrostatic charge. Use
explosion-proof equipment. Avoid shock and friction. Wash hands and face before
breaks and immediately after handling the product.
Use a closed system if possible. Use a local exhaust if dust or aerosol will be
generated.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Storage conditions: Keep container tightly closed. Store in an explosion-poof freezer.
Store under inert gas.
Protect from moisture.
Store locked up.
Be sure not to give the container unexpected impacts, such as falling down or falling
off.
Store away from incompatible materials such as oxidizing agents.
Heat-sensitive, Moisture-sensitive, Air-sensitive
Packaging material: Comply with laws.
Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
etc. Use respirators approved under appropriate government standards and follow
local and national regulations.
Hand protection: Impervious gloves.
Eye protection: Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.
Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C): Solid
Form: Crystal- Powder
Colour: Very pale yellow - Greyish yellow red
Odour: No data available
pH: No data available
Melting point/freezing point:No data available
Boiling point/range: No data available
Flash point: No data available
Flammability or explosive
limits:
Lower: No data available
Upper: No data available
Relative density: No data available
Solubility(ies):
[Water] No data available
[Other solvents] No data available
Section 10. STABILITY AND REACTIVITY
Stable under proper conditions.
Chemical stability:
Possibility of hazardous May explosively decompose on heating, shock, friction, etc.
reactions:
Conditions to avoid: Heat, Spark, Open flame, Static discharge, Shock, Friction
Incompatible materials: Oxidizing agents, Reducing agents, Strong acids, Combustibles, Organic substances
Trimethylsilylethynyl(phenyl)iodonium
Tetrafluoroborate
Section 10. STABILITY AND REACTIVITY
Hazardous decomposition Carbon monoxide, Carbon dioxide, Hydrogen Iodide, Boron oxides , Hydrogen
products: fluoride, Silicon oxides
Section 11. TOXICOLOGICAL INFORMATION
Acute Toxicity: No data available
Skin corrosion/irritation: No data available
No data available
Serious eye
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC = No data available
NTP = No data available
Reproductive toxicity: No data available
Section 12. ECOLOGICAL INFORMATION
Ecotoxicity:
No data available
Fish:
Crustacea: No data available
No data available
Algae:
Persistence / degradability: No data available
Bioaccumulative No data available
potential(BCF):
Mobility in soil
Log Pow: No data available
No data available
Soil adsorption (Koc):
Henry's Law No data available
constant(PaM3/mol):
Section 13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities and an expert of disposal. You may be able
to dissolve or mix material with a combustible solvent and little by little burn in a chemical incinerator equipped with
an afterburner and scrubber system. If a large amount of the substance is burned at a time, an explosion may
occur. Observe all federal, state and local regulations when disposing of the substance.
Section 14. TRANSPORT INFORMATION
4.1: Flammable solid.
Hazards Class:
Subsidiary risk: 8: Corrosive.
2925
UN-No:
Proper shipping name: Flammable solid, corrosive, organic, n.o.s.
Packing group: II
Section 15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.
Trimethylsilylethynyl(phenyl)iodonium
Tetrafluoroborate
SECTION 16 - ADDITIONAL INFORMATION
N/A
