---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
  Product identifiers
    Product name        : Strontium selenide    
    CAS-No.        : 1315-07-7    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    
  
  

---

Section 2. HAZARDS IDENTIFICATION
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Acute toxicity, Inhalation (Category 3)
    Acute toxicity, Oral (Category 3)
    Specific target organ toxicity - repeated exposure (Category 2)
    Acute aquatic toxicity (Category 1)
    Chronic aquatic toxicity (Category 1)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Toxic by inhalation and if swallowed. Danger of cumulative effects. Very toxic to aquatic organisms, may
    cause long-term adverse effects in the aquatic environment.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    H301        Toxic if swallowed.    
    H331        Toxic if inhaled.    
    H373        May cause damage to organs through prolonged or repeated exposure.    
    H410        Very toxic to aquatic life with long lasting effects.    
    Precautionary statement(s)
    P261        Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.    
    P273        Avoid release to the environment.    
    P301 + P310        IF SWALLOWED: Immediately call a POISON CENTER or doctor/    
    physician.
    P311        Call a POISON CENTER or doctor/ physician.    
    P501        Dispose of contents/ container to an approved waste disposal plant.    
    Supplemental Hazard        none    
    Statements
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R-phrase(s)
    R23/25        Toxic by inhalation and if swallowed.    
    R33        Danger of cumulative effects.    
    R50/53        Very toxic to aquatic organisms, may cause long-term adverse effects in    
    the aquatic environment.
    S-phrase(s)
    S20/21        When using do not eat, drink or smoke.    
    S28        After contact with skin, wash immediately with plenty of soap and water.    
    S45        In case of accident or if you feel unwell, seek medical advice immediately    
    (show the label where possible).
    S60        This material and its container must be disposed of as hazardous waste.    
    S61        Avoid release to the environment. Refer to special instructions/ Safety    
    data sheets.
  Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substances
    Formula        : SeSr    
    Molecular Weight        : 166,58 g/mol    
    Component        Concentration    
  Strontium selenide
    CAS-No.        1315-07-7        -    
    EC-No.        215-258-1    
    Index-No.        034-002-00-8    

---

Section 4. FIRST AID MEASURES
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
  In case of eye contact
    Flush eyes with water as a precaution.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    Acute selenium poisoning produces central nervous system effects, which include nervousness,
    convulsions, and drowsiness. Other signs of intoxication can include skin eruptions, lassitude,
    gastrointestinal distress, teeth that are discolored or decayed, odorous ("garlic") breath, and partial loss of
    hair and nails. Chronic exposure by inhalation can produce symptoms that include pallor, coating of the
    tongue, anemia, irritation of the mucosa, lumbar pain, liver and spleen damage, as well as any of the other
    previously mentioned symptoms. Chronic contact with selenium compounds may cause garlic odor of
    breath and sweat, dermatitis, and moderate emotional instability., To the best of our knowledge, the
    chemical, physical, and toxicological properties have not been thoroughly investigated.
  Indication of any immediate medical attention and special treatment needed
    no data available

---

Section 5. FIREFIGHTING MEASURES
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    Strontium oxides, Selenium/selenium oxides
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions, protective equipment and emergency procedures
    Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate
    ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
    environment must be avoided.
  Methods and materials for containment and cleaning up
    Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
    Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
    protection.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
  Specific end uses
    no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
    the product.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
    respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering
    controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
    respirators and components tested and approved under appropriate government standards such
    as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Information on basic physical and chemical properties
    a) Appearance        Form: powder    
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        Melting point/range: 1.600 °C - lit.    
    point
    f) Initial boiling point and no data available
    boiling range
    g) Flash point        not applicable    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        no data available    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    octanol/water
    p) Autoignition        no data available    
    temperature
    q) Decomposition        no data available    
    temperature
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

---

Section 10. STABILITY AND REACTIVITY
  Reactivity
    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    no data available
  Incompatible materials
    Strong oxidizing agents
  Hazardous decomposition products
    Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
  Information on toxicological effects
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    IARC:        3 - Group 3: Not classifiable as to its carcinogenicity to humans (Strontium selenide)    
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    May cause damage to organs through prolonged or repeated exposure.
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation        Toxic if inhaled. May cause respiratory tract irritation.    
  Ingestion        Toxic if swallowed.    
  Skin        Harmful if absorbed through skin. May cause skin irritation.    
  Eyes        May cause eye irritation.    
  Signs and Symptoms of Exposure
    Acute selenium poisoning produces central nervous system effects, which include nervousness,
    convulsions, and drowsiness. Other signs of intoxication can include skin eruptions, lassitude,
    gastrointestinal distress, teeth that are discolored or decayed, odorous ("garlic") breath, and partial loss of
    hair and nails. Chronic exposure by inhalation can produce symptoms that include pallor, coating of the
    tongue, anemia, irritation of the mucosa, lumbar pain, liver and spleen damage, as well as any of the other
    previously mentioned symptoms. Chronic contact with selenium compounds may cause garlic odor of
    breath and sweat, dermatitis, and moderate emotional instability., To the best of our knowledge, the
    chemical, physical, and toxicological properties have not been thoroughly investigated.
  Additional Information
    RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
  Toxicity
    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    Very toxic to aquatic life with long lasting effects.

---

Section 13. DISPOSAL CONSIDERATIONS
  Waste treatment methods
  Product
    Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
    professional waste disposal service to dispose of this material. Dissolve or mix the material with a
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
  Contaminated packaging
    Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
  UN number
    ADR/RID: 3283        IMDG: 3283        IATA: 3283    
  UN proper shipping name
    ADR/RID: SELENIUM COMPOUND, SOLID, N.O.S. (Strontium selenide)
    IMDG: SELENIUM COMPOUND, SOLID, N.O.S. (Strontium selenide)
    IATA:        Selenium compound, solid, n.o.s. (Strontium selenide)    
  Transport hazard class(es)
    ADR/RID: 6.1        IMDG: 6.1        IATA: 6.1    
  Packaging group
    ADR/RID: III        IMDG: III        IATA: III    
  Environmental hazards
    ADR/RID: no        IMDG Marine pollutant: no        IATA: no    
  Special precautions for user
    no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A