配方类型：	ADHESIVES
配方说明：	Solid Sealant for Aluminum (Low temp.)
配方组成：	Milled glass fibers/30 Castor oil, U.S.P./24 Adiprene L100/100
配制方法：	The glass fibers are dried at 100-110C for at least 1 hr and then thoroughly mixed into the "Adiprene" L100 in a Hobart mixer, or equivalent. Immediately prior to use, the castor oil is added, and the components are mixed until a uniform blend was obtained. This sealant is designed for use on aluminum substrates. The surface of the aluminum must be cleaned by washing with acetone or methyl ethyl ketone; then apply one brush-coat of Chemlock 607 to the cleaned surfaces and allow to air dry for at least 30 min before applying the sealant. The sealant mixture may be applied with a calking gun or with a trowel. The sealant will cure to a tackfree condition in about 28 hr at 25C, and will reach full cure in 72 hr at 25C or in 48 hr at 50C.

返回数据库查询