配方类型：	ADHESIVES
配方说明：	Elastomeric Sealant, Construction
配方组成：	Molecular Sieve (4A)/1.0 One Step Formulation (Constant Low Humidity Conditions) 1. Combine DPM-1002 resin, plasticizer and "thixcin" R. Blend with a high shear mixer until a temperature of 130-140F. is reached. 2. Add "Silane" and blend in with slow speed mixer. Add remaining ingredients and blend the entire formulation with a slow speed mixer. 3. Pass over a tight three roll mill until a Hegman value of six or less is indicated. 4. Package in moisture-impermeable co
配制方法：	Grind on a three roll mill with minimum air exposure. Store in moisture-impermeable containers. Ideally, the activator should be prepared under dry air, dry nitrogen or vacuum. Totally enclosed equipment might be suitable if adequate grinding can be obtained. Step 2 Process the remaining components of the formulation with a procedure identical to that used in the one step technique. Step 3 Combine proper proportions of materials produced in Steps 1 and 2 by blending with a slow speed mixer under a dry atmosphere. Package in containers which will prevent moisture contamination during storage. Aluminumfoil lined cardboard cartridges appear to be satisfactory.

返回数据库查询