配方类型：	ADHESIVES
配方说明：	Resin Emulsion Adhesive
配方组成：	Polyvinyl Alcohol/1 Toluene/25 Water/140 Emulsify the polyvinyl acetate in an equal amount of water containing the polyvinyl alcohol as an emulsifying agent. Heat the "Vinsol" with the dibutyl phthalate and toluene at 55-60C to form a smooth solution (10-15 min). This "Vinsol" solution is then slowly added in alternate increments with the remaining water to the stirred polyvinyl acetate emulsion. When using a mechanical stirrer at 3,000-12,000 rpm, time required
配制方法：	Depending on the temperature of the hot-melt and the length of time the mix is held at this temperature, an antioxidant, such as octylphenol, and an acid acceptor, such as "Epi-Rez" 510, should be added in varying amounts between 0.25-1.0 percent of the ethyl cellulose content. The above general formula may be modified in many ways to meet the needs of specialty applications. "Vinsol" resin may be substituted for the "Staybelite" resin at lower cost when color is not an important factor. A few of the specialty applications are: high-speed thermoplastic packaging, laminating cellophane or foils to paper, adhering films and artificial leather to metal, and holding metal parts together during welding.

返回数据库查询