配方类型：	COATINGS
配方说明：	Concrete Seal Latex (18% Solids)
配方组成：	Mor-Flo 155 (38%)/401.0 Ethylene Glycol/17.0 SWS 211 (10%)/0.5 Water/527.9 Dibutyl Phthalate/13.0 Tributoxyethyl Phosphate/3.6 Butyl Carbitol/26.0 FC-129 (1%)/10.0 Proxel GXL/1.0
配制方法：	Charge the mixing vessel with the water of dilution. With good agitation, slowly add the components in the order listed. Continue stirring for one-half hour. Adjust the pH to 7.5-8.5, if necessary, with 28% ammonium hydroxide. Surface Preparation: The floor surface should be thoroughly cleaned and rinsed. Sufficient care should be taken to remove oily type soils. Acid etching is not recommended. Application: Two coats are recommended. Allow up to 1 h between coats, depending on solids and drying conditions. Coverage: Approximately 500 ft^2/gal, and up to 1500 ft^2/gal for the second coat, depending on the conditions of the substrate.

返回数据库查询