Basicacteristics
Appearance: slightly yellow transparent liquid
Ionic: slight cationic / non-ionic
PH value: 4.5—6.5
Solubility: can be dissolved in water at any ratio
Hfeeling: special soft, smooth
Features Advantages
☆This product is the end of epoxy silicone oil ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable fprocessing polyester wool fibers, feel theacteristics of special sponginess, good soft smooth; also suitable fcellulose fiber, nylon other blended fabric feel finishing;
☆Mixed with M-100A 9905A silicone oil products, especially suitable fa variety of polyester velvet, wool blankets, chemical fiber lace other fabric feel finishing,Meet the needs of customers fluffy, soft smooth comprehensive effect.
☆ Mixed with M-100A 9906A silicone oil products, especially fpoly-cotton, cotton knitted fabric finishing;
Dilution use the method
☆This product is 50% solid content of high concentration emulsion, can be used directly, better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) 1 :5 (10% solids) , do not need to adjust the PH value;
☆After thinning, you can use exhausting method continuous padding method,
Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 ℃, 15-30min, bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 20-40g / l, 120 ℃pre-bake, 150-180 ℃
Package Storage
50kg 120kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
