|
Name:
|
Sulfuryl chloride fluoride distilled 99% Material Safety Data Sheet
|
|
Synonym:
|
Chloro fluoro sulfone; Chlorosulfonyl fluoride; Fluorosulfonyl chloride; Sulfonyl chloride fluoride; Sulfuryl chlorofluoride; Sulfuryl fluorochlorid
|
|
CAS:
|
13637-84-8
|
Section 1 - Chemical Product
MSDS Name:Sulfuryl chloride fluoride distilled 99% Material Safety Data Sheet
Synonym:Chloro fluoro sulfone; Chlorosulfonyl fluoride; Fluorosulfonyl chloride; Sulfonyl chloride fluoride; Sulfuryl chlorofluoride; Sulfuryl fluorochlorid
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
|
CAS#
|
Chemical Name
|
content
|
EINECS#
|
|
13637-84-8
|
Sulfuryl chloride fluoride, distilled
|
99
|
237-126-2
|
Hazard Symbols: C
Risk Phrases: 14 34
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Reacts violently with water. Causes burns.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. May cause systemic effects. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting.
Chronic:
Effects may be delayed.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. If breathing is difficult, give oxygen.
Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Reacts violently with water. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Do NOT use water directly on fire. Use dry chemical. Do NOT get water inside containers.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust. Provide ventilation. Do not get water inside containers.
Section 7 - HANDLING and STORAGE
Handling:
Use only in a well-ventilated area. Keep container tightly closed.
Do not get on skin or in eyes. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam. Do not breathe vapor.
Storage:
Corrosives area. Deep freeze (below -20C). Keep containers tightly closed. Store protected from moisture.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 13637-84-8: United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides).2.5 mg/m3 TWA (as F) (listed under Fluorides).
France - VME: (listed as fluorides): 2.5 mg/m3 VME (as F) Germany: (listed as fluorides): 2.5 mg/m3 VME (as F) Malaysia: (listed as fluorides): 2.5 mg/m3 TWA (as F) Netherlands: (listed as fluorides): 3.5 mg/m3 STEL (as F) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Clear liquid
Color: clear, colorless
Odor: pungent odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 7 deg C
Freezing/Melting Point: -124.7 deg C
Autoignition Temperature: Not applicable.
Flash Point: 109 deg C ( 228.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Reacts.
Specific Gravity/Density: 1.623 g/cm3
Molecular Formula: ClFO2S
Molecular Weight: 118.51
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. Reacts violently with water.
Conditions to Avoid:
Incompatible materials, moisture, excess heat.
Incompatibilities with Other Materials:
Strong acids, bases, alcohols, heat, moisture, water.
Hazardous Decomposition Products:
Hydrogen chloride, oxides of sulfur, hydrogen fluoride gas, fluoride fumes, chloride fumes, halides.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 13637-84-8: WT4900000 LD50/LC50:
Not available.
Carcinogenicity:
Sulfuryl chloride fluoride, distilled - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 13637-84-8: No information available.
Canada
CAS# 13637-84-8 is listed on Canada's NDSL List.
CAS# 13637-84-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13637-84-8 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION N/A
